Ripper Performance Intake Indian Chief / Chieftain / Roadmaster
Also Check out the “Naked Ripper” intake for 111/116 bikes
This intake is designed for the 111 and 116 engines. It requires you to remove all of the original intake. With this unit you will be sucking in all of the cool air your engine wants. The cone filter is huge and restricts the air flow very little. It comes with a rain guard. The tank protects most of it from rain. It includes the needed tube to connect your pollution control vent. The built-in airbox helps deliver the most air when needed. It also promotes a very smooth air flow path. The bulb shape of this intake is very special. Anytime air has to turn a corner it tends to slow down because the speeds change on the outside curve and the inside curve as well as friction against the walls. This bulb design is larger than a normal elbow allowing the speed difference and wall friction to be reduced since the pressures are reduced as it makes the turn. This is a new approach to getting air into the manifold efficiently. Many intakes have a pretty shape but force the air to take a hard 90 degree turn compressing part of the air flow and slowing it down. It is time for motorcycle intakes to advance in design.
This intake is made by a break through technology. It is 3D Resin printed. Industry is using 3D printing more and more to make prototypes of new products. However, We have developed a way to make high quality usable intakes directly from the printer. This allows us to make shapes and chambers exactly as needed without compromise. The plastic is resistant to heat, gas and oil and will last many many years.
Please note that you need to buy a K&N re-charge kit or similar. This allows you to oil the filter the first time. Then you will be able to clean it and re-oil it many times!
The blue rubber band is a special silicon band used to seal the intake to your manifold and is included. It can withstand 600 degrees temp. The included filter is reusable and requires cleaning and oiling.
Complete set up (fuel computer not included) $349.95 (shipping $13.95)
We recommend the use of a fuel controller with our intakes.
For Even More HP & Torque Add the 60MM throttle body. Direct Bolt on.
INTAKE ONLY – THROTTLE BODY NOT INCLUDED
Now included is a plug for the crankcase vent tube. If you want to not connect the vent tube, you can install the plug and put a seperate filter on the vent tube (not included).
IF YOU INTEND TO MODIFY YOUR BIKE TO PERFORM TO IT’S MAX, YOU NEED TO INCLUDE THE BEST AIR BREATHER POSSIBLE!